LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2009 >> tC Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> 2AZ-FE Engine Control System >> Engine Coolant Temperature Sensor >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Engine Coolant Temperature Sensor: Removal

  1. DRAIN ENGINE COOLANT  (See ON-VEHICLE INSPECTION )
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the sensor connector.
    2. Using SST, remove the sensor and gasket.

      SST 09817-33190 

scientia non olet · About LEMON Manuals