DTC Check / Clear
- CHECK DTC
- Turn the ignition switch to OFF.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Chassis / EMPS / Trouble Codes/
- Read the DTCs by following the prompts on the intelligent tester or Techstream.
HINT:
Refer to the intelligent tester or Techstream operator's manual for further details.
- CLEAR DTC
- Turn the ignition switch to OFF.
- Connect the Techstream to the DLC3.
- Turn the Techstream on.
- Enter the following menus: Chassis / EMPS / Trouble Codes/
- Clear the DTCs by following the prompts on the Techstream.
- Turn the ignition switch to OFF.
- Disconnect the Techstream from the DLC3.