Power Outlet Socket: Removal
- REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See REMOVAL )
- REMOVE UPPER CONSOLE PANEL (See REMOVAL )
- REMOVE REAR CONSOLE BOX COVER (See REMOVAL )
- REMOVE CONSOLE BOX CARPET (See REMOVAL )
- REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (See REMOVAL )
- REMOVE FRONT CONSOLE BOX (See REMOVAL )
- REMOVE POWER OUTLET SOCKET ASSEMBLY
- Disengage the 6 claws and open the lower instrument panel.
- Disconnect the power outlet socket connector.
- Using a screwdriver with its tip wrapped in protective tape, disengage the claw, then turn the power outlet socket clockwise and push the power outlet socket halfway out.
- Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and then push the power outlet socket out.
- REMOVE POWER OUTLET SOCKET COVER
- Disengage the 2 claws and remove the power outlet socket cover.