Installation

CRUISE CONTROL: CLUTCH SWITCH: INSTALLATION

1. INSTALL CLUTCH PEDAL SWITCH ASSEMBLY

(a) Install the clutch pedal switch assembly with the nut.

Torque : 16 Nm (163 kgf-cm, 12 ft-lbf)

(b) With the clutch pedal fully depressed, check the clearance.





Standard Measurement:





2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) Install the lower No. 1 instrument panel airbag assembly Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.