Camshaft Oil Control Valve: Installation: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)
1. Apply a light coat of engine oil to a new O-ring and install the O-ring to the oil control valve.
  
  Fig 1: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  TEXT IN ILLUSTRATION
  
  *1 New O-Ring
  NOTE:
  - Do not allow foreign matter to contact the oil seal face of the oil control valve (the surface that contacts the cylinder head cover).
  - Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
3. Connect the oil control valve connector.
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)
1. Apply a light coat of engine oil to a new O-ring and install the O-ring to the oil control valve.
  
  Fig 2: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  TEXT IN ILLUSTRATION
  
  *1 New O-Ring
  NOTE:
  - Do not allow foreign matter to contact the oil seal face of the oil control valve (the surface that contacts the cylinder head cover).
  - Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
3. Connect the oil control valve connector.
INSPECT FOR OIL LEAK . Refer to REPLACEMENT - Step 6