Steering Angle Sensor: Removal: Removal
WARNING:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing. Refer to PRECAUTION .
- TURN FRONT WHEELS FACING STRAIGHT AHEAD
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- REMOVE STEERING PAD . Refer to REMOVAL - Step 2
- REMOVE STEERING WHEEL ASSEMBLY . Refer to REMOVAL - Step 4
- REMOVE STEERING COLUMN COVER . Refer to REMOVAL - Step 5
- REMOVE SPIRAL CABLE . Refer to REMOVAL - Step 6
- REMOVE STEERING ANGLE SENSOR
- Disengage the 6 claws and 2 pins, and remove the steering angle sensor from the spiral cable.