Power Window Master Switch

WINDSHIELD / WINDOWGLASS: POWER WINDOW MASTER SWITCH: INSPECTION

1. INSPECT POWER WINDOW MASTER SWITCH

(a) Check the resistance.





(1) Measure the resistance according to the value(s) in the table below.

Standard resistance:

Driver switch






If the result is not as specified, replace the power window master switch.

Standard resistance:

Front passenger side switch






If the result is not as specified, replace the power window master switch.

Standard resistance:

Rear LH side switch






If the result is not as specified, replace the power window master switch.

Standard resistance:

Rear RH side switch






If the result is not as specified, replace the power window master switch.

(b) Check the illumination operation.

(1) Apply battery voltage to the power window master switch and check that the illumination comes on.

OK:





If the result is not as specified, replace the power window master switch.