Installation

FA20 ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)

(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(c) Connect the VVT sensor connector.

2. INSTALL NO. 1 ENGINE UNDER COVER Installation

3. INSTALL VVT SENSOR (for Intake Side of Bank 2)

(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(c) Connect the VVT sensor connector

4. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)

(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(c) Connect the VVT sensor connector.

5. INSTALL VVT SENSOR (for Intake Side of Bank 1)

(a) Apply a light coat of engine oil to the new O-ring of the VVT sensor.

(b) Install the VVT sensor with the bolt.

Torque : 6.4 Nm (65 kgf-cm, 57 in-lbf)

(c) Connect the VVT sensor connector.

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation