Installation

POWER ASSIST SYSTEMS: POWER STEERING ECU: INSTALLATION; 2013 MY FR-S [03/2012 -]

1. PRECAUTION

CAUTION:
Be sure to read Precaution thoroughly before servicing Power Steering System.

2. INSTALL POWER STEERING ECU BRACKET

(a) Install the power steering ECU bracket with 4 screws.

Torque : 3.5 Nm (36 kgf-cm, 31 in-lbf)

3. INSTALL POWER STEERING ECU ASSEMBLY

(a) Install the power steering ECU assembly with the 2 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Engage the clamp.

(c) Connect the 3 connectors to the power steering ECU assembly.

(d) Connect the connector to the power steering ECU assembly.









(1) As shown in the illustration, return the lock lever to its original position to connect the connector and securely push in the lock of the lock lever.

(e) Engage the clamp.

4. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

Installation

5. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT

Programming and Relearning