Oil Pressure Switch: Installation: Installation

1. Apply adhesive to 2 or 3 threads of the oil pressure switch.
   Fig 1: View Of Applying Adhesive To Threads Of Oil Pressure Switch

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Adhesive

   Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

2. Using a deep socket wrench 24 mm, install the oil pressure switch.

   Torque: 15 N*m (153 kgf*cm, 11 ft.*lbf) 

   NOTE:

   Do not start the engine within 1 hour of installation.

3. Connect the connector.

Refer to ON-VEHICLE INSPECTION - Step 1