Oil Pump: Reassembly: Reassembly

INSTALL OIL PUMP COVER SUB-ASSEMBLY
1. Coat the drive and driven rotors with engine oil, and place them into the oil pump with the marks facing the oil pump cover side, as shown in the illustration.
  
  Fig 1: Identifying Oil Pump Marks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil pump cover sub-assembly with the 5 bolts.
  
  Fig 2: Identifying Oil Pump Cover Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.8 N*m (90 kgf*cm, 79 in.*lbf)
INSTALL OIL PUMP RELIEF VALVE
1. Coat the relief valve with engine oil.
  
  Fig 3: Identifying Oil Pump Relief Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Insert the oil pump relief valve and valve spring into the oil pump body hole.
3. Using a 27 mm socket wrench, install the oil pump relief valve plug.
  Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf)