Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A

Fig 1: Identifying New Passenger Vehicle Wiring Harness Repair Kit (220 589 04 99 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Wiring Harness Repair Kit, Basic (000 589 13 99 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Blade Holder With Clamping Pliers (220 589 01 99 50)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying MCP 2.8 / Fl Blade. 2,8 (220 589 01 99 59)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 5: Identifying MCP 2.8 / Fl Blade. 2.8 / JPT / SPT (000 589 13 99 30)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Unfasten secondary release on version with lock tab

Using a suitable tool, lift locking shackles (1) in direction shown by arrow.

Fig 6: Lifting Locking Shackles
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Unfasten secondary release on version with coupling cap (shown on micro quadlock system with Multi Contact Point coupling)
Using a suitable tool (1), pry up lock tab (2) for coupling cap (4).
Pull clutch housing (3) from coupling cap (4) in direction shown by arrow.

Fig 7: Pulling Clutch Housing From Coupling Cap
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Unfasten secondary release on version with retaining cage (shown on micro quadlock system with Multi Contact Point coupling)
Using a suitable tool (1), slide retaining cage (2) into pre-locking position in direction shown by arrow.

Fig 8: Sliding Retaining Cage Into Pre-Locking Position
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Unpin female contacts from coupling
Insert blade holder with clamping pliers with MCP 2.8/Fl. 2.8 blade or MCP 2.8/Fl. 2.8/JPT/SPT blade from the front through the openings in contact cavity of coupling (1).
This step compresses the spring shackles (2) on the female contact.
A slight tug on the corresponding cable will remove the female contact (1) from the coupling.

Fig 9: Removing Female Contacts From Coupling
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.