Overall Vehicle (Coupe) - Self-Diagnostic System, General Information, Retrofitting & Conversion, Maintenance, Testing & Repair, Safety Precautions, Torque Specifications
- Self-Diagnostic System
- General Information
- Measures for preventing damage to vehicles or components when performing electric welding work - AH00.00-P-0005-01FF
- Notes on thread repairs - AH00.00-P-0008-01MCC
- Advantages of repairing wiring harnesses - AH00.19-P-1000-03A
- Repair methods for wiring harnesses - AH00.19-P-1000-04SM
- Assessment of damage in wiring harnesses - AH00.19-P-1000-05A
- Notes regarding plug connections - AH00.19-P-1000-06A
- Notes on soft soldering - AH00.19-P-1000-07A
- Notes on replacement of safety-relevant and special components - AH00.19-P-1000-08A
- Notes on crimping - AH00.19-P-1000-09A
- Notes on soldering - AH00.19-P-1000-10A
- Notes on cable protection - AH00.19-P-1000-11A
- Retrofitting & Conversion
- Retrofitting and converting special equipment: Smart - AN00.01-Z-0998CZ
- Retrofitting and converting special equipment - AN00.01-Z-0999ZZ
- Table of contents for retrofitting and converting special equipment - AN00.10-P-1000MZA
- Retrofitting and converting accessories: Smart - AZ00.01-Z-0998CZ
- Retrofitting and converting accessories - AZ00.01-Z-0999ZZ
- Table of contents for retrofitting and converting accessories - AZ00.10-P-1000MZA
- Maintenance
- Maintenance and care: Smart - AP00.01-Z-0998CZ
- Maintenance and care - AP00.01-Z-0999ZZ
- Preface - AP00.20-P-0000-01MCC
- Safety notes/warning notes - AP00.20-P-0000-02FF
- Service intervals/work sheets general information - AP00.20-P-0000-04MCU
- Maintenance - AP00.20-P-0000MCU
- Reset service indicator - AP00.20-P-0042MCU
- Safety precautions for new vehicles that are being put in storage - AP00.70-P-1000MCU
- Testing & Repair
- Testing and repair work: Smart: Overall vehicle - AR00.00-Z-9451CA
- Testing and repair work: Smart - AR00.01-Z-0997CA
- Testing and repair work: Smart - AR00.01-Z-0997CB
- Testing and repair work: Smart - AR00.01-Z-0997CC
- Testing and repair work: Smart - AR00.01-Z-0998CZ
- Testing and repair work - AR00.01-Z-0999ZZ
- Testing and repair work: Smart - AR00.01-Z-9132CB
- Testing and repair work: Smart - AR00.01-Z-9451CA
- Testing and repair work: Smart - AR00.01-Z-9717CC
- Repair wiring harness by crimping - AR00.19-P-0100-03A
- Repair wiring harness by crimping (with watertight connections) - AR00.19-P-0100-04A
- Repairing cable harness by soldering - AR00.19-P-0100-05A
- Repair cable harness using rapid connection technology - AR00.19-P-0100-06A
- Repairing wiring harness using solder connectors - AR00.19-P-0100-09A
- General repair methods for wiring harness - AR00.19-P-0100A
- Remove contacts from sensor laminated contact connector - AR00.19-P-0120-01A
- Remove contacts from sensor laminated contact connector - AR00.19-P-0120-01B
- Remove contacts from sensor laminated contact coupling - AR00.19-P-0120-02A
- Remove contacts from micro quadlock system connector - AR00.19-P-0120-03A
- Remove contacts from micro quadlock system connector - AR00.19-P-0120-03B
- Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04A
- Remove contacts from micro quadlock system coupling - AR00.19-P-0120-04B
- Remove contacts from E 95 coupling - AR00.19-P-0120-05A
- Remove contacts from Micro Timer 3 coupling - AR00.19-P-0120-06A
- Remove contacts from Junior Power Timer coupling - AR00.19-P-0120-07A
- Remove contacts from Junior Power Timer connector - AR00.19-P-0120-08A
- Remove contacts from Multi Contact Point (MCP) coupling - AR00.19-P-0120-09A
- Remove contacts from sensor laminated contact coupling - AR00.19-P-0120-02B
- Remove contacts from standard power timer connector - AR00.19-P-0120-11A
- Remove contacts from FIN sensor contact coupling - AR00.19-P-0120-12A
- Remove contacts from FIN sensor contact connector - AR00.19-P-0120-13A
- Remove contacts from maxi power timer coupling - AR00.19-P-0120-14A
- Remove contacts from 2.5 round plug contact coupling - AR00.19-P-0120-15A
- Remove contacts from 2.5 plug round plug contact - AR00.19-P-0120-16A
- Remove contacts from 2.5 solder contact coupling round plug contact - AR00.19-P-0120-17A
- Remove contacts from laminated contact system coupling - AR00.19-P-0120-19A
- Remove contacts from laminated contact system plug - AR00.19-P-0120-20A
- Remove contacts from Siemens ELO coupling - AR00.19-P-0120-23A
- Remove contacts from Siemens ELO connector - AR00.19-P-0120-24A
- Remove contacts from mini laminated contact coupling - AR00.19-P-0120-26A
- Remove contacts from mini laminated contact plug - AR00.19-P-0120-27A
- Remove contacts from YAZAKI 1.5 system coupling - AR00.19-P-0120-28A
- Remove female contact from double flat spring contact coupling - AR00.19-P-0120-30A
- Perform check of vehicles in stock every 90 days - AR00.20-P-0001MCU
- Perform check of vehicles in stock every 270 days - AR00.20-P-0002MCU
- Secure vehicle on vehicle lift - AR00.60-P-0100MCC
- Safety Precautions
- Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension - AS00.00-Z-0001-01A
- Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. - AS00.00-Z-0002-01A
- Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns from working on the vehicle as it is being started or when the engine is running - AS00.00-Z-0005-01A
- The high voltage used for arc welding presents a lethal hazard. Explosion hazard when welding in the area of highly combustible materials. Risk of injury from weld splatter and UV light when welding. Risk of poisoning when inhaling welding vapors. - AS00.00-Z-0007-01A
- Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. - AS00.00-Z-0009-01A
- Risk of death caused by vehicle slipping or toppling off of the lifting platform. - AS00.00-Z-0010-01A
- Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. - AS00.00-Z-0011-01A
- Risk of injury from fingers being pinched or jammed when working on gas struts under pressure - AS00.00-Z-0012-01A
- Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid. - AS00.00-Z-0013-01A
- Risk of injury caused by scraping or cutting body parts on sharp vehicle part - AS00.00-Z-0017-01A
- Risk of death caused by body parts being pulled in by rotating vehicle wheels and roller dynamometer rollers - AS00.00-Z-0019-01A
- Safety information: Overall vehicle - AS00.00-Z-9999ZZ
- Safety information - AS00.01-Z-0999ZZ
- Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tubing. - AS00.19-Z-0001-01A
- Risk of injury caused by burns to skin and eyes, risk of poisoning caused by inhaling fumes during soldering. - AS00.19-Z-0002-01A
- Torque Specifications
- Tightening torques: Smart - BA00.01-Z-0998CZ
- Tightening torques - BA00.01-Z-0999ZZ
- DIN coarse-pitch thread tightening torque tables - BA00.10-P-1000-01A
- DIN tables for tightening torques as under MBN 10 105, 10 143 - BA00.10-P-1000-04A
- DIN tables for tightening torques as under DIN 912 - BA00.10-P-1000-05A