Perform Wheel Alignment Check - AR40.20-P-0200SR

MODEL 453

	Measure, adjust
1	Correct tire inflation pressure
			AP40.15-P-4061C
2	Carry out initial measurement	Carry out measurements according to information provided by measuring device manufacturer. Conduct measurements on unladen vehicle. The fuel tank must be at least 90 % filled.
		Front axle camber	*BE40.20-P-1001-06E
		Caster	*BE40.20-P-1002-06E
		Total toe at front axle	*BE40.20-P-1001-07FA
		Rear axle camber	*BE40.20-P-1001-09BA
		Total rear axle toe	*BE40.20-P-1001-10DA
		Drive line angle	*BE40.20-P-1001-21B
3	Adjust front axle toe		AR40.20-P-0323-02SR
		Jam nut at tie rod	*BA46.40-P-1002-01F
		Total toe at front axle	*BE40.20-P-1001-07FA
4	Carry out final measurement	The front axle camber and caster are not adjustable. The rear axle camber, total toe and drive line angle are not adjustable.	The fuel tank must be at least 90 % filled.
		Front axle camber	*BE40.20-P-1001-06E
		Caster	*BE40.20-P-1002-06E
		Total toe at front axle	*BE40.20-P-1001-07FA
		Rear axle camber	*BE40.20-P-1001-09BA
		Total rear axle toe	*BE40.20-P-1001-10DA
		Drive line angle	*BE40.20-P-1001-21B
		If, after adjusting the toe on the front axle, the measurement values are out of tolerance: ↓ Repair or replace affected components and repeat measurements.
5	Calibrate steering wheel angle sensor using diagnostic system
			AD00.00-P-2000-06SR

TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER/CASTER

Number	Designation		Model 453
BE40.20-P-1001-06E	Front axle camber	∠°	-18' (± 60')

CHECK VALUES FOR FRONT AXLE TOE

Number	Designation		Model 453
BE40.20-P-1001-07FA	Total toe at front axle	∠°	-9' (± 15')

CHECK VALUES FOR REAR AXLE CAMBER

Number	Designation		Model 453
BE40.20-P-1001-09BA	Rear axle camber	∠°	-72' (± 30')

CHECK VALUES FOR REAR AXLE TOE

Number	Designation		Model 453.3/4	Model 453.0
BE40.20-P-1001-10DA	Total rear axle toe	∠°	15' (±25')	10' (±25')

TEST VALUES FOR DRIVE LINE ANGLE

Number	Designation		Model 453
BE40.20-P-1001-21B	Drive line angle	∠°	0' (±45')

TEST AND ADJUSTMENT VALUES FOR FRONT AXLE CAMBER/CASTER

Number	Designation		Model 453
BE40.20-P-1002-06E	Caster	∠°	7° 40' (± 1°)

TIE ROD

Number	Designation		Model 453
BA46.40-P-1002-01F	Jam nut at tie rod	Nm	53