LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1978 >> GF Automatic Trans >> Repair and Diagnosis >> Maintenance >> Procedures >> Wheel Alignment >> TOYOTA >> Adjustment >> Caster >> Pickup
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Wheel Alignment: TOYOTA: Adjustment: Caster: Pickup

NOTE: Camber and caster adjustments should always be made in one operation.

If caster angle is not within specifications, adjust by adding or removing shims between the upper control arm shaft and the front suspension crossmember. To increase caster, add shims to rear side of the upper control arm shaft mounting bolt or remove shims from the front side. To decrease caster, reverse procedure.

scientia non olet · About LEMON Manuals