LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1978 >> GF Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Tune-Up >> NIPPONDENSO Electronic Ignition System >> Testing >> Ignition Coil Test >> Resistor Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Resistor Test

Connect ohmmeter leads to resistor terminals "a" and "b". Reading should be 1.2 ohms. If resistance is not within specifications, replace ignition coil.

scientia non olet · About LEMON Manuals