October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Thermal Vacuum Valve
- Remove thermal vacuum valve from intake manifold. Connect hoses to 2 upper ports and cap lower port. Submerge valve in container of water.
CAUTION:
Do not allow water to enter valve.
- With water below 86°F (30°C), blow air through valve. If air does not pass freely, replace valve. Heat water above 104°F (40°C). No air should pass. If air passes through valve, replace valve.
Courtesy of SUBARU OF AMERICA, INC.