LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1991 >> Justy Base >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Load Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Load Test

  1. Using proper starter bench tester, apply 3.5 ft. lbs. (4.7 N.m) load to starter. Engage tester switch for less than 30 seconds. Note and record voltage drop and current draw.
  2. Voltage should not fall below 8 volts. Current draw should be less that 200 amps. Starter should spin at 1200 RPM or more.
scientia non olet · About LEMON Manuals