Bench Testing: Brushes
NOTE:
Information on testing rotor, stator, diodes and IC regulator for Justy models is not available.
Inspect brushes for freedom of movement in holder. Clean brush holder if necessary. Check brushes for cracks and wear. Check brush springs for corrosion or damage. Ensure brushes are not worn beyond limit line. See BRUSH WEAR LIMIT table.
BRUSH WEAR LIMIT
| Application | In. (mm) |
|---|---|
| Justy | .315 (8.0) |
| Legacy | .059 (1.5) |
| XT | .236 (6.0) |