LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1992 >> Justy Base >> Repair and Diagnosis >> Engine Mechanical >> Starter >> On-Vehicle Testing >> Ignition Switch Test >> Start Circuit Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Start Circuit Test

  1. Remove lower instrument panel below steering wheel. Remove air duct. Remove harness connector from rear of ignition switch.
  2. Using jumper wire, apply 12 volts to switch terminal "B". Connect test light to switch terminal "S". Turn ignition switch to START position. Test light should illuminate. If not, replace ignition switch.
scientia non olet · About LEMON Manuals