LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1992 >> Justy Base >> Repair and Diagnosis >> Engine Performance >> Sensor Range Charts >> Engine Controls - Sensor Operating Range Charts >> Sensor Operating Range Charts >> Turbocharger Pressure Sensor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Turbocharger Pressure Sensor

TURBOCHARGER PRESSURE SENSOR VOLTAGE (LEGACY) (1)

Terminals Voltage
Sensor Connector
Red Wire & Black Wire (2) 3.1
Red Wire & Black Wire (3) 2.6
Red Wire & Black Wire (4) 2.1
(1) Apply 5 volts across terminals No. 1 (White wire) and 2 (Red wire), then connect terminal No. 1 to positive voltage and terminal No. 2 to negative voltage. Install vacuum pump to pressure sensor hose fitting. Measure voltage across indicated terminals when pressure is applied to pressure sensor.
(2) With 7.87 in. Hg applied to pressure sensor.
(3) With Zero in. Hg applied to pressure sensor.
(4) With -7.87 in. Hg applied to pressure sensor.
TURBOCHARGER PRESSURE SENSOR RESISTANCE (LEGACY)

ECU Connector (1) Sensor Connector Ohms
Pin No. 3 White Wire 0
Pin No. 4 Black Wire 0
Pin No. 5 Red Wire 0
(1) Disconnect ECU and pressure sensor connectors. Measure resistance between indicated pins and terminals of connectors.
scientia non olet · About LEMON Manuals