LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1993 >> Justy Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Sensor Range Charts >> Engine Controls - Sensor Operating Range Charts >> Sensor Operating Range Charts >> Vehicle Speed Sensor (VSS)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Vehicle Speed Sensor (VSS)

VEHICLE SPEED SENSOR (VSS) VOLTAGE (1)

Application ECU Connector Pin No. Wire Color
Impreza 8 & 11 (2)
Justy 4 (22-Pin) LT GRN/BLK
Legacy 11 (12-Pin) GRN/BLK
Loyale 22 (24-Pin) YEL/GRN
SVX 11 (12-Pin) YEL/RED
(1) Turn ignition on. Connect voltmeter between indicated terminal and ground. Slowly rotate drive wheels. Voltage should fluctuate between zero and about 5 volts (Legacy) or 2 volts (except Legacy).
(2) Measure resistance between specified instrument cluster terminals while rotating speedometer drive. Resistance should fluctuate from less than 10 ohms to open circuit 4 times per revolution.