Power Mirror Switch
Pry mirror switch from instrument panel using a small screwdriver. Disconnect switch connector. Check continuity between specified terminals of switch connector with switch button in specified position. See POWER MIRROR SWITCH CONTINUITY TEST . SeeFig 1 . Replace switch if continuity is not as specified.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position | Terminal Nos. | |
|---|---|---|
| Left Mirror | ||
| Up | 4 & 7, 2 & 1 | |
| Down | 2 & 7, 4 & 1 | |
| Left | 4 & 9, 2 & 1 | |
| Right | 2 & 9, 4 & 1 | |
| Right Mirror | ||
| Up | 4 & 6, 2 & 1 | |
| Down | 2 & 6, 4 & 1 | |
| Left | 4 & 8, 2 & 1 | |
| Right | 2 & 8, 4 & 1 | |