LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1994 >> Loyale Standard >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Ignition Switch Test >> Start Circuit Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Start Circuit Test

  1. Remove lower instrument panel below steering wheel. Remove air duct. Disconnect ignition switch harness connector.
  2. Using jumper wire, apply 12 volts to ignition switch terminal "B". See Figure . Connect test light to switch terminal "S". Turn ignition switch to START position. If test light does not illuminate, replace relay.
scientia non olet · About LEMON Manuals