LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1995 >> Legacy Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Anti-Lock Brake System - With 5.3 Abs) >> Component Testing >> Hydraulic Unit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hydraulic Unit

WARNING: This page is about a different car, the 1996 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Use pressure gauges specifically for brake pressure testing. Do not use gauge previously used for transmission testing. Fluid contamination may result.

Raise and support vehicle. Remove wheels. Remove bleeder screws from front brake calipers and install pressure gauges to calipers. Bleed air from pressure gauges. Perform sequence control. See SEQUENCE CONTROL . If pressures are not as specified, replace hydraulic control unit.

scientia non olet · About LEMON Manuals