LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1999 >> Forester Base >> Repair and Diagnosis >> Electrical >> Starters >> On-Vehicle Testing >> Ignition Switch Test >> Start Circuit Test
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Start Circuit Test

  1. Remove lower instrument panel below steering column. Remove air duct. Disconnect ignition switch harness connector.
  2. Using jumper wire, apply 12 volts to ignition switch terminal "B". See Figure. Connect test light to switch terminal "S". Turn ignition switch to START position. If test light does not illuminate, replace ignition switch.
scientia non olet · About LEMON Manuals