LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnostics >> Engine Control Module >> Removal And Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal And Installation

  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02001230
  2. Remove side sill front cover.
    Fig 2: Removing Side Sill Front Cover
    G02001231
  3. Detach floor mat of front passenger seat.
    Fig 3: Detaching Floor Mat Of Front Passenger Seat
    G02001232
  4. Remove protect cover.
    Fig 4: Removing Protect Cover
    G02001233
  5. Remove nuts which hold ECM to bracket.
    Fig 5: Removing Nuts Which Hold ECM To Bracket
    G02001234
  6. Remove clip from bracket.
    Fig 6: Removing Clip From Bracket
    G02001235
  7. Disconnect ECM connectors.
    Fig 7: Disconnecting ECM Connectors
    G02001236
  8. Take out ECM.
    Fig 8: Removing ECM
    G02001237
  9. Install in the reverse order of removal.
    CAUTION: When replacing ECM, be careful not to use the wrong specification. ECM to avoid any damage to the fuel injection system.
scientia non olet · About LEMON Manuals