Select Lever: Assembly

Clean all parts before assembly.
Apply grease to each part (NIGTIGHT LYW No. 2 or equivalent). See Figure .
Assemble in the reverse order of disassembly.
NOTE:
- When installing the lock plate, be careful to position it in the correct direction.
  
  Fig 1: Installing Lock Plate
- Be careful to install the spring and button into the select lever grip in the correct direction.
  
  Fig 2: Installing Spring & Button Into Select Lever Grip
After completing the fitting, transfer the select lever to position "P"-"1", then check whether the indicator and select lever agree, whether the pointer and select lever agree, and what the operating force is.