Fuel Tank Pressure Sensor: Service and Repair

REMOVAL AND INSTALLATION




1. Remove fuel tank.




2. Remove protector cover.




3. Disconnect connector from fuel tank pressure sensor.




4. Release clips which hold fuel pipes onto fuel tank.




5. Move the two fuel pipes to upper side, and remove bolt which install fuel tank pressure sensor to bracket.
6. Move clip, and disconnect pressure hose from fuel tank.




7. Disconnect pressure hose from fuel tank pressure sensor.




8. Install in the reverse order of removal.

Tightening torque: 7.35 ±1.96 N.m (0.75 ±0.20 kg-m, 5.4 ±1.4 ft-lb)