LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Braking System (Diagnostics) >> Subaru Select Monitor >> Operation >> Read Diagnostic Trouble Code
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Read Diagnostic Trouble Code

  1. Prepare Subaru Select Monitor kit.
    Fig 1: Preparing Subaru Select Monitor Kit
    G02088748
  2. Connect diagnosis cable to Subaru Select Monitor.
  3. Insert cartridge into Subaru Select Monitor. See SPECIAL TOOLS  , PREPARATION TOOL, General Descriptions.
    Fig 2: Inserting Cartridge
    G02088749
  4. Connect Subaru Select Monitor to data link connector.
    1. Data link connector located in the lower portion of the instrument panel (on the driver's side).
      Fig 3: Locating Data Link Connector
      G02088750
    2. Connect diagnosis cable to data link connector.
  5. Turn ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.
    Fig 4: Turning Subaru Select Monitor Switch To ON
    G02088751
  6. On the < Main Menu > display screen, select the {Each System Check} and press the [YES] key.
  7. On the < System Selection Menu > display screen, select the {Brake Control System} and press the [YES] key.
  8. Press the [YES] key after displayed the information of engine type.
  9. On the < ABS Diagnosis > display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.
  10. On the < Diagnostic Code(s) Display > display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the [YES] key.
scientia non olet · About LEMON Manuals