Rear Combination Light Assembly: Removal: Sedan

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.
Remove clips and then detach trunk rear trim.

Fig 1: Removing Clips & Detaching Trunk Rear Trim
Courtesy of SUBARU OF AMERICA, INC.
Remove hook (A) and then turn over rear portion of trunk side trim.

Fig 2: Removing Hook & Turning Over Rear Portion Of Trunk Side Trim
Courtesy of SUBARU OF AMERICA, INC.
Remove harness clip (A).
Remove three nuts and then detach rear combination light while disconnecting connector.

Fig 3: Removing Three Nuts & Detaching Rear Combination Light

Courtesy of SUBARU OF AMERICA, INC.