LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Switches and Harness >> Inspection >> Neutral Position Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Neutral Position Switch

  1. Turn ignition switch to OFF.
  2. Disconnect connector neutral position switch.
  3. Using the circuit tester, verify the current in neutral position. Also verify that there is no current in positions other than neutral.
    Fig 1: Checking Neutral Position Switch
    G02037187
  4. Replace defective parts.
scientia non olet · About LEMON Manuals