Clutch Switch: Installation

WARNING: This page is about a different variant/trim than selected.

Move clevis pin of the push rod right and left and hold where it moves smoothly, then measure stroke of clutch pedal.
Specified clutch pedal full stroke:
1. A: 130-135 mm (5.12-5.31 in)
Tightening torque:
1. T: 8 N.m (0.8 kgf-m, 5.8 ft-lb)
Fig 1: Measuring Stroke Of Clutch Pedal
Courtesy of SUBARU OF AMERICA, INC.
If clutch pedal stroke is out of specification, adjust the stroke. Refer to ADJUSTMENT under CLUTCH PEDAL .
Connect clutch switch connector.