LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T Control Systems >> Select Cable >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Select Cable: Removal

  1. Prior to removal, set lever to "N" position.
  2. Remove heat shield cover.
    Fig 1: Removing Heat Shield Cover
    G02862769Courtesy of SUBARU OF AMERICA, INC.
  3. Remove snap pin from range select lever.
    Fig 2: Removing Snap Pin From Range Select Lever
    G02862770Courtesy of SUBARU OF AMERICA, INC.
  4. Remove plate assembly from transmission case.
    Fig 3: Removing Plate Assembly From Transmission Case
    G02862771Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect cable from select lever and then remove cable bracket.
    Fig 4: Disconnecting Cable From Select Lever And Removing Cable Bracket
    G02862772Courtesy of SUBARU OF AMERICA, INC.
  6. Remove select cable from plate assembly.
scientia non olet · About LEMON Manuals