LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T Servicing >> Removal & Installation >> Inhibitor Switch >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inhibitor Switch: Removal

  1. Move select lever to neutral position.
  2. Remove air intake chamber and duct.
  3. Disconnect inhibitor switch connector. See Fig 1 .
  4. Remove center exhaust pipe.
  5. Remove snap pin from range select lever. See Fig 2 .
  6. Remove plate assembly from transmission case. See Fig 3 .
  7. Remove bolts. See Fig 4 .
  8. Move range select lever to parking position (left side). See Fig 5 .
  9. Remove inhibitor switch from transmission. See Fig 6 .
Fig 1: Disconnecting Inhibitor Switch Connector
G00366812Courtesy of SUBARU OF AMERICA, INC.
Fig 2: Removing Snap Pin
G00366813Courtesy of SUBARU OF AMERICA, INC.
Fig 3: Removing Plate Assembly
G00366814Courtesy of SUBARU OF AMERICA, INC.
Fig 4: Removing Bolts
G00366815Courtesy of SUBARU OF AMERICA, INC.
Fig 5: Removing Range Select Lever
G00366816Courtesy of SUBARU OF AMERICA, INC.
Fig 6: Removing Inhibitor Switch
G00366817Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals