Transmission Position Sensor/Switch: Adjustments

ADJUSTMENT

1. Shift the select lever to the N range.
2. Loosen the three inhibitor switch securing bolts.
3. Insert ST as vertical as possible into the holes in the inhibitor switch lever and switch body.
ST 499267300 STOPPER PIN





4. Tighten the three inhibitor switch bolts.
Tightening torque: 3.4 Nm (0.35 kgf-m, 2.5 ft. lbs.)
5. Repeat the above checks. If the inhibitor switch is determined to be "faulty", replace it.