LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Impreza RS, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security & Locks >> Security Control Module >> Adjustment >> Impact Sensitivity
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Impact Sensitivity

NOTE: Before adjustment, make sure the security control module has been securely installed on the bracket.
  1. Remove the security control module. Refer to REMOVAL , Security Control Module.
  2. Adjust the sensitivity adjust screw in the security control module.
    NOTE: After adjusting, be sure to plug the adjust screw hole.
    Fig 1: Removing Security Control Module
    G02868851
  3. Install the security control module.
  4. Perform the impact sensitivity test.
scientia non olet · About LEMON Manuals