LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2002 >> Outback L.L. Bean Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Specifications & Procedures) >> Wheel Alignment >> Inspection >> Camber >> Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Wheel Alignment: Inspection: Camber: Inspection

WARNING: This page is about a different car, the 2003 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the front wheel on turning radius gauge. Make sure the ground contacting surfaces of front and rear wheels are set at the same height.
  2. Set the ST into the center of the wheel, and then install the wheel alignment gauge.

    ST 927380002 ADAPTER

    Fig 1: Setting ST Into Center Of Wheel & Install Wheel Alignment Gauge
    G01980156Courtesy of SUBARU OF AMERICA, INC.
    NOTE: See SPECIFICATIONS  for the camber values.

    Front: See Figure .

    Rear: See Figure .

scientia non olet · About LEMON Manuals