Reduction Drive Gear: Installation

WARNING: This page is about a different variant/trim than selected.

Install the reduction drive gear assembly.
NOTE: Insert it fully into position until the bearing shoulder bottoms.

Fig 1: Installing Reduction Drive Gear Assembly
Courtesy of SUBARU OF AMERICA, INC.
Install the reduction driven gear. < Ref. to INSTALLATION , Reduction Driven Gear.>
Combine the transmission case with the extension case, and install rear vehicle speed sensor.
< Ref. to INSTALLATION , Extension Case.>
Install the transmission assembly to the vehicle.
< Ref. to INSTALLATION , Automatic Transmission Assembly.>