Front Fender: Service and Repair

FENDER PANEL

Front Fender Panel:

REMOVAL

1. Disconnect the ground cable from battery.
2. Remove the front bumper face.
3. Remove the mud guard.
4. Remove the side sill spoiler.
5. Remove the side protector.
6. Loosen the bolts and clip to remove front fender.






INSTALLATION

1. Install in the reverse order of removal.
2. When the fender panel is installed, clearance between fender panel and hood or front fender must be equal.

Tightening torque: 7.4 N.m (0.75 kgf-m, 5.5 ft-lb)