October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Manifold Pressure/Vacuum Sensor: Service and Repair

Pressure Sensor

REMOVAL

1. Disconnect battery ground cable.

2. Disconnect connector from pressure sensor.

3. Remove pressure sensor.

INSTALLATION

Install in the reverse order of removal.

Tightening torque: 2.4 N.m (0.24 kgf-m, 1.7 ft-lb)

NOTE: Replace O-ring with a new one.