Cruise Control System: Actuator: Installation
Install in the reverse order of removal.
Tightening torque:
- Actuator: 7.4 N.m (0.75 kgf-m, 5.4 ft-lb)
- Cable end nut: 12 N.m (1,2 kgf-m, 8.7 ft-lb)
NOTE:
- (A): Must be adjusted when cable end outer is fixed in place, so that gap between throttle cam and lever is 0 - 1 mm (0 - 0.04 in), or inner cable deflection (D) is 1 - 8 mm (0.039 - 0.315 in) with specified range of throttle cable play.
(Must be attached while throttle cam is being pulled by wire cable.)
- (B): Must be coated evenly on cam end inner connection.
- (C): Cover must be inserted securely, until tip of cable touches cover stopper.