LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Forester X, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine (Diagnostics) (H4SO) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor (OBD Mode)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor (OBD Mode)

  1. On << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type is displayed.
  4. On << Engine Diagnosis >> display screen, select the {OBD System} and press the [YES] key.
  5. On << OBD Menu >> display screen, select the {4. Diagnosis Code(s) Cleared} and press the [YES] key.
  6. When the 'Clear Diagnostic Code?' is shown on the display screen, press the [YES] key.
  7. Turn the Subaru Select Monitor and ignition switch to OFF.
    NOTE:
    • After the memory has been cleared, the idle air control solenoid valve must be initialized. To do this, turn the ignition switch to ON position. Wait 3 seconds before starting the engine.
    • For detailed operation procedure, refer to SUBARU SELECT MONITOR OPERATION MANUAL.
scientia non olet · About LEMON Manuals