LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2004 >> Legacy F4-2.5L SOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Camshaft Position Sensor: Service and Repair

REMOVAL




1. Disconnect battery ground cable.




2. Disconnect connector from camshaft position sensor.




3. Remove bolt which installs camshaft position sensor to camshaft position sensor support.




4. Remove bolt which installs camshaft position sensor support to camshaft cap LH.
5. Remove camshaft position sensor and camshaft position sensor support as a unit.




6. Remove camshaft position sensor itself.

INSTALLATION
Install in the reverse order of removal.
Tightening torque:
- Camshaft position sensor support; 6.4 N.m (0.65 kgf.m, 4.7 ft.lb)
- Camshaft position sensor; 6.4 N.m (0.65 kgf.m, 4.7 ft.lb)
scientia non olet · About LEMON Manuals