September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Rear Window Glass: Installation
- Bond dam rubber and matching pin.
Courtesy of SUBARU OF AMERICA, INC.
- Install glass in the same procedure as for windshield glass. < Ref. to
, INSTALLATION , Windshield Glass. >
- Connect rear defogger terminals.
CAUTION:
- When door is opened/closed after glass is bonded, always lower door glass and then open/close door carefully.
- Move vehicle slowly.
- After completion of all work, allow vehicle to stand for about 24 hours.
NOTE:
For minimum drying time and time the vehicle must be left standing before driving after bonding, follow instructions or instruction manual from the adhesive manufacturer.
- After curing of adhesive, pour water on external surface of vehicle to check that there are no water leaks.
CAUTION:
When a vehicle is returned to the user, tell him or her that the vehicle should not be subjected to heavy impact for at least three days.