Section 14 (Clutch System): General Description: Specifications
WARNING: This page is about a different variant/trim than selected.
ITEM SPECIFICATION
| Item | Non-TURBO model | TURBO model | ||||||
|---|---|---|---|---|---|---|---|---|
| Clutch cover | Type | Push type | Pull type | |||||
| Diaphragm set load | kg (lb) | 580 (1276) | 800 (1764) | |||||
| Clutch disc | Facing material | Woven (Non asbestos) | Woven (Non asbestos) | |||||
| (2) x (1) x thickness mm (in) | Flywheel side | 225 x 150 x 3.5 (8.86 x 5.91 x 0.138) | 230 x 155 x 3.5 (9.06 x 6.10 x 0.1) | |||||
| Pressure plate side | 230 x 155 x 3.2 (9.06 x 6.10 x 0.126) | |||||||
| Spline (2) | mm (in) | 25.2 (0.992), (No. of teeth: 24) | 25.2 (0.992), (No. of teeth: 24) | |||||
| Clutch release lever ratio | 1.6 | 1.7 | ||||||
| Release bearing | Grease-packed self-aligning | Grease-packed self-aligning | ||||||
| Clutch pedal | Full stroke | mm (in) | 130 - 135(5.12 - 5.31) | 130 - 135(5.12 - 5.31) | ||||
| Free play | mm (in) | 4 - 13(0.16 - 0.51) | 4 - 13(0.16 - 0.51) | |||||
| Clutch disc | Depth of rivet head mm (in) | Standard | 1.65 - 2.25 (0.065 - 0,089) | Flywheel side: 1.35 - 1.95 (0.0531 - 0.0768) Clutch cover side: 1.65 - 2.25 (0.0650 - 0.0886) |
||||
| Limit of sinking | 0.3(0.012) | 0.3 (0.012) | ||||||
| Limit for deflection | mm (in) | 0.8 (0.031) at R = 107 (4.21) | 0.8 (0.031) at R = 110 (4.33) | |||||
|
||||||||