LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Baja Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Security And Locks) >> Impact Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Impact Sensor: Removal

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key from ignition switch.
  2. Close all the doors, trunk lid and rear gate.
  3. Press the UNLOCK button of transmitter.
  4. Change the setting of impact sensor using Subaru Select Monitor.
  5. Disconnect the ground cable from battery.
  6. Remove the impact sensor.
scientia non olet · About LEMON Manuals