LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Forester XS, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Security System >> Inspection >> Check Ignition Switch Circuit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Check Ignition Switch Circuit

CHECKING IGNITION SWITCH CIRCUIT

Step Check Yes No
1 : CHECK IGNITION SWITCH SIGNAL. 
  1. Disconnect the security control unit harness connector.
  2. Turn the ignition switch to ON.
  3. Measure the voltage between the harness connector terminal and chassis ground.

Connector & terminal 
(B93) No. 2 (+) - chassis ground (-): 		 Is the voltage more than 10 V? Ignition switch circuit is OK. Check the harness for open circuits and shorts between the security control unit and ignition switch.
scientia non olet · About LEMON Manuals