LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2005 >> Forester XT, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Brake Control} and press the [YES] key.
  3. Press the [YES] key after the engine type is displayed.
  4. On the << Brake Control Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
  5. When the "Done" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For details concerning operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".
scientia non olet · About LEMON Manuals