Data Link Connector: Note
This connector is used both for the OBD-II general scan tools and Subaru Select Monitor.
CAUTION:
Do not connect any scan tools other than the OBD-II general scan tools and Subaru Select Monitor, because the circuit for Subaru Select Monitor may be damaged.
DATA LINK CONNECTOR TERMINALS
| Terminal No. | Contents | Terminal No. | Contents |
|---|---|---|---|
| 1 | Power supply | 9 | Blank |
| 2 | Blank | 10 | Subaru Select Monitor/OBD-II general scan tool signal |
| 3 | Blank | 11 | Blank |
| 4 | Blank | 12 | Ground |
| 5 | Blank | 13 | Ground |
| 6 | Line end check signal 1 | 14 | Blank |
| 7 | Blank | 15 | Blank |
| 8 | Line end check signal 2 | 16 | Blank |